ABSTRACT
This project, 12v battery charge consist of few chapters, deal extensively with the design and construction of a batter charge which is capable of charging a 12v battery.
The introductory chapter goes a long why in defining the battery charger and explanations of the mode of operations will be death with as we proceed.
TABLE OF CONTENT
Construction of a 12v Battery Charger
Approval
Dedication
Acknowledgement
Abstract
CHAPTER ONE
1.1 Introduction
CHAPTER TWO
2.1 Literature Review
CHAPTER THREE
DESCRIPTION OF COMPONENT USED
3.1 Transformer
3.2 Comparator
3.3 Resistor
3.4 Diode
3.5 Relay
3.6 Zener Diode
3.7 Light Emiting Diode (LED)
3.8 Filtering
3.9 AC to DC Converter
CHAPTER FOUR
DESCRIPTION OF THE SYSTEM
4.1 The Block Diagram of the System
4.2 Explanation of the Block Diagram
4.2i Voltage Step Down Unit
4.2ii AC/DC Converter Unit
4.2iii Filter and Regulation Unit
4.2iv Voltage Control and Monition Unit
- The Circuit Diagram and the Operation of Components
- Voltage Regulation
CHAPTER FIVE
5.1 Conclusion
5.2 Test and Result
5.3 Component Used and their Price
CHAPTER ONE
1.1 INTRODUCTION
A device which consists of electrodes and electrolyte for the storage of chemical energy. But brings about a reaction between its electrode and electrolyte in a way to course a flow of electrons through an external circuits is known as battery.
There are two types of battery, these are primary and secondary battery. The primary known as dry cell is one whose electrolyte dries up when used, its ampere-hour rating can not be recharge while the secondary type known as wet cell is the one whose chemical energy can be restore through a charging process. There are different types of secondary battery, namely lead acid, Nickel-cadmium and silver zinc battery. In wet case, a constant potential charging method is adopted in this project work, this is a phenomenon whereby the direct current voltage rectification to charge the battery, the direct current from the rectifier is passed through the battery that is being charged in a reverse direction in which the battery supplies current to the external cell.
The charger is intended to charge battery terminal voltage up to 12v. It employees a monitoring unit that indicates when the battery is fully to the rated voltage. It also contains other sections like power supply, voltage regulation and the control section, which can be highlighted in the subsequent chapter
DISCLAIMER: All project works, files and documents posted on this website, eProjectTopics.com are the property/copyright of their respective owners. They are for research reference/guidance purposes only and some of the works may be crowd-sourced. Please don’t submit someone’s work as your own to avoid plagiarism and its consequences. Use it as a reference/citation/guidance purpose only and not copy the work word for word (verbatim). The paper should be used as a guide or framework for your own paper. The contents of this paper should be able to help you in generating new ideas and thoughts for your own study. eProjectTopics.com is a repository of research works where works are uploaded for research guidance. Our aim of providing this work is to help you eradicate the stress of going from one school library to another in search of research materials. This is a legal service because all tertiary institutions permit their students to read previous works, projects, books, articles, journals or papers while developing their own works. This is where the need for literature review comes in. “What a good artist understands is that nothing comes from nowhere. The paid subscription on eProjectTopics.com is a means by which the website is maintained to support Open Education. If you see your work posted here by any means, and you want it to be removed/credited, please contact us with the web address link to the work. We will reply to and honour every request. Please notice it may take up to 24 – 48 hours to process your request.
