ABSTRACT
An Industrial barrow was produced which would aid in conveying heavy materials in the laboratory and industrial set up.
It was made from mild steel that was cut to dimension, made into shape and coupled to form the desired outstanding barrow. Details are shown in chart (fig 1) containing the picture representation.
Some of it’s dimensions are;
Bucket – Area of 816.3 in2
Carriage – Ø 1.3in x 63.65in
Stand – 1.7in x 27in
Braces – 1.5in x 12.5in; Ø 0.72 in x . 9.5in
Rim – Ø 9.5in
Shaft – Ø 2in x 10.3in
TABLE OF CONTENTS
TITLE PAGE ii
APPROVAL PAGE iii
DEDICATION v
ACKNOWLEDGEMENT vii
ABSTRACT viii
CHAPTER ONE
Introduction 1
CHAPTER TWO
Literature review 4
CHAPTER THREE
Fabrication procedure 7
Material of construction 7
Design consideration 10
Construction procedure 18
Project drawing
Costing of standard wheel barrow
CHAPTER FOUR
Discussion 26
CHAPTER FIVE
Precautions 27
Recommendations 29
Conclusions 29
References. 31
CHAPTER ONE
INTRODUCTION
One should be able to get familiarized with the industrial barrow; its design, uses or function and areas of demand.
ILLUSTRIATION: An industrial barrow can be classified under a second order lever; considering the L.E.F. (Load, Effort and Fulcrum) positions. The weight or load being in between the effort and fulcrum tells a typical second order lever, the effort being applied at one and which is the handle of the barrow (helps one to lift the load);
The wheel being the fulcrum and the bucket which serves as the load or weight (where the object would be placed upon).
DESIGN: The barrow was constructed having in mind the end of which it would be used. Practically, the barrow is meant to carry loads which ordinarily would be difficult to carry by ordinary human strength.
In this technology, it was found out that is could to a considerable cheight, ease the labour to which one has to go through in his daily activities especially when in the workshop or laboratory when heavy loads are to be conveyed.
The design of the wheel barrow has aided main to use a minimal amount of energy to convey heavy materials for distants with the aid of its wheel which when not present would be impossible or might involve more labour force when the barrow are not used. However, due to its state of function. It is designed with metal steel so that it can resist the force/weight applied to it. this is because of its resistively, strength, rigidity and toughness.
FUNCTION/USES: The sole aim of constructing on industrial barrow is its usage; to move materials or industrial loads from one point of the factory / industry / laboratory to the other end or from any of these to the other or another destination either for repair or replacement. This in large extent, reduces cost, saves human strength, time and for convenience.
AREAS OF DEMAND: As the name implies, it is basically an industrial equipment that aid in carrying out functions or tasks which ordinarily cannot be attained if human effort well left to do to alone. It is very vital that it be kept in proper use to achieve its objectives. It is also capable of carrying rigid materials/objects which if not used could result in the damage of the spinal cord in young adults (youths). Thus; it helps to eradicate these problems to some certain extent.
DISCLAIMER: All project works, files and documents posted on this website, eProjectTopics.com are the property/copyright of their respective owners. They are for research reference/guidance purposes only and some of the works may be crowd-sourced. Please don’t submit someone’s work as your own to avoid plagiarism and its consequences. Use it as a reference/citation/guidance purpose only and not copy the work word for word (verbatim). The paper should be used as a guide or framework for your own paper. The contents of this paper should be able to help you in generating new ideas and thoughts for your own study. eProjectTopics.com is a repository of research works where works are uploaded for research guidance. Our aim of providing this work is to help you eradicate the stress of going from one school library to another in search of research materials. This is a legal service because all tertiary institutions permit their students to read previous works, projects, books, articles, journals or papers while developing their own works. This is where the need for literature review comes in. “What a good artist understands is that nothing comes from nowhere. The paid subscription on eProjectTopics.com is a means by which the website is maintained to support Open Education. If you see your work posted here by any means, and you want it to be removed/credited, please contact us with the web address link to the work. We will reply to and honour every request. Please notice it may take up to 24 – 48 hours to process your request.
