CHAPTER ONE
INTRODUCTION
As the growing population of human race widens the gulf between energy supply
and energy demand, the imbalance in energy availability sent researchers into
excavating for a way of settling this age long squabble. A lasting solution is vested
on alternative use of the renewable energy source, a project that is yet to be
widely applied. Hence, the continuation of the unsettled yearns for sufficient
power. Consequently, the power lines are frequently over loaded resulting to a
trip of power by the action of switch gears or by the load shading process
undertaken by the distribution authorities.
Since it is crystal clear that some institutions such as health related institutions
and some other delicate systems should not be allowed to suffer equally with
their counterparts, Automatic Phase Selector is used to sustain energy
consumption in the time of phase trip. The design of this circuit involves the use
of automatic switches but the details of design varies from place to place, time to
time and also depends on the type of load involved.
This project involves the use of transistor driven relays to affect the change of
phase whenever the voltage condition becomes intolerable in the previous phase
connected.
~ 2 ~
1.1 BACKGROUND
The intelligent phase selector is a system that is capable of comparing three
phases and switching automatically to any of the three phases. The system
consists of three main parts namely; the transformer, comparators (which is the
brain of the system) and electrical switching device (relay).
The transformer used here is the step down type of transformer (it step down
240v to 12v) and these transformer is feed in with different phase voltage,
rectified and smooth. Then fed in to a voltage regulator that has positive output.
The regulator outputs were connected to comparators. Here the comparators are
three in number. We call the comparators the brain of the system because these
comparators are connected in a way that each of them will give out an output.
The relay in the system is where the output voltage is connected. In this project
we even went as far as using pictures for illustration of some components.
1.2 AIMS/OBJECTIVES OF THE PROJECT
The analysis of this project cannot go without enumerating the goals meant to be
achieved in the pursuit of the work. These objectives include:-
i. To develop a simple low cost device aimed at easing the prevalent burden
faced by delicate offices, parastatals and institutions who need very low but
constant power supply. Since supply is always on along the distribution lines
~ 3 ~
that supply such sites, what pesters on the progress of work thereof is always
the unwarranted trip of phases due to power usage from neighboring
consumers. The automatic phase selector therefore, erases this setback form
the face of progress of work in such offices.
ii. To stimulate the interest of upcoming students to take up research not only
in their field of study “Electrical/Electronic Engineering” but also to extend
their arms to other disciplines, thus enhancing the versatility of
Electrical/Electronic Engineering.
iii. To create awareness that will stimulate the interest of fellow students who
intend to take up research topic on automatic switch of any type.
1.3 RELEVANCE OF THE PROJECT
The issue of selecting or switching over manually is now a thing of the past.
Nowadays we know that homes and offices enjoy steady power supply once the
three phases are available (i.e. red yellow and blue phases). Is just a question of
making a quick and automatic three phase selector?
1.4 SCOPE OF THE PROJECT
The scope of the project covers aspects like the features of automatic three phase
selector, its applications, and its operations. Its advantages and its components.
Finally, it covers the importance on the need of automatic three phase selector
~ 4 ~
and contributions toward a greater sharing load balance and a better three phase
power distribution and monitoring for domestics consumers.
1.5 LIMITATIONS
Owning to the nature of this project, the research centers and the resources were
not easy to come by within the immediate environment. Some of the limitation
encountered on the course of this project include financial and time constrains
which did not really take much room for additional capacity beyond what is at
hand.
1.6 TARGET BENEFICIARIES
This project will provide lasting solutions to the heavy losses incurred by
commercial institution, industries, hospitals, airport etc caused by poor manual
selector means and efficient switching facilities. It will also be of use in our
household because poor selector of phase manually causes damage to our
household equipment example electronics like television,radio,videoplayer etc
and electrical appliances like refrigerator, air condition, fans just to mention but a
few. Finally another target is to eliminate the loss of human life due to manual
selection of the three phases.
~ 5 ~
1.7 SIGNIFICANCE OF STUDY
The significance of this project work cannot be overemphasized. This is because
the number of lives that has being lost to the hand of interruption of power in
health institutions and the like is not negligible. Delicate appliances have become
the main victim of this artificial circumstance. The applicability of the outcome of
this research work in several facets of human endeavor makes this work of real
importance to humanity.
The use of the device produced from this research work would help to reduce
human labor and hazard, going by the fact that many have been handicapped by
electric shock because of the attempt they made to select another phase, and
that the handicapped are helpless and cannot change phase.
1.8 ACHIEVEMENT OF THE CONSTRUCTION OF THE PROJECT
As long as electrical generation and construction is must in everyday activities,
electrical power consumption is expected to be reliable and constant supply.
Therefore, what we tend to achieve from this project is;
1. To have constant power supply.
2. To have quick operation i.e. phase selection
3. Reliable power supply
4. Easy operation
5. Avoidance of risk in doing manual changeover or switch
DISCLAIMER: All project works, files and documents posted on this website, eProjectTopics.com are the property/copyright of their respective owners. They are for research reference/guidance purposes only and some of the works may be crowd-sourced. Please don’t submit someone’s work as your own to avoid plagiarism and its consequences. Use it as a reference/citation/guidance purpose only and not copy the work word for word (verbatim). The paper should be used as a guide or framework for your own paper. The contents of this paper should be able to help you in generating new ideas and thoughts for your own study. eProjectTopics.com is a repository of research works where works are uploaded for research guidance. Our aim of providing this work is to help you eradicate the stress of going from one school library to another in search of research materials. This is a legal service because all tertiary institutions permit their students to read previous works, projects, books, articles, journals or papers while developing their own works. This is where the need for literature review comes in. “What a good artist understands is that nothing comes from nowhere. The paid subscription on eProjectTopics.com is a means by which the website is maintained to support Open Education. If you see your work posted here by any means, and you want it to be removed/credited, please contact us with the web address link to the work. We will reply to and honour every request. Please notice it may take up to 24 – 48 hours to process your request.