Page Length: 63

Size: 206 KB

Format: PDF & Word

5,000.00

ABSTRACT

The research project work examines the impact of cost accounting in a manufacturing organisation.  For any manufacturing organisation to survive quality cost control measure must be put in place. The study reviewed the works of auditors on the subject matter primary and secondary data were used for study.  The simple average percentage was the statistical tool that was used to analyze the data that was gathered for the study.  The study observed that through costing techniques, competitive price can be fixed for the business.  The study recommended among other things that costing possess should be reviewed from time so that organisational goals can be achieved effectively and efficiently.

 

 

 

TABLE OF CONTENTS

Title page                                                                                                  i

Certification                                                                                               ii

Dedication                                                                                                 iii

Acknowledgement                                                                                    iv

Abstract                                                                                                     v

Table of content                                                                                        vi

CHAPTER ONE:          Introduction                                                     

1.1    Background of the study                                                                 1

1.2    Statement of the problem                                                               3

1.3    Objective of the study                                                                     3

1.4    Research question                                                                          4

1.5    Justification of the study                                                                 5

1.6    Scope of the study                                                                          5

1.7    Limitation of the study                                                                     5

1.8    Research Methodology                                                                            6

1.9    Plan of the Study                                                                             6

1.10  Definition of terms                                                                           6

CHAPTER TWO: LITERATURES REVIEW   

2.1    Introduction                                                                                     9

2.2    The Impact of Cost Accounting in a Manufacturing Organisation 9

2.3    Costing System and Cost Control                                                  11

2.4    Cost Control Application                                                                 12

2.5    Steps in Cost Control                                                                      13

2.6    Merit of Cost Control                                                                       13

2.7    Problems/Constraints Faced by Entrepreneurs/Managers for

Applying Cost Accounting                                                              14

2.8    Definition of Cost Accounting                                                          17

2.9    Costing Techniques and Method                                                   19

2.10The Importance of Cost Accounting System and Techniques        20

2.11  Specific Order Costing                                                                    21

2.12  Operational Costing                                                                        22

2.13  Super Imposed Techniques and Principles                                   23

2.14  Classification of Cost                                                                      26

2.15  Classification by Nature                                                                  26

2.15  The Scope of Cost Accounting                                                       29

2.16  Financial Accounting Vs Cost Accounting                                     31

2.17  Application of Cost Accounting                                                      32

2.18  The Role of Cost Accounting                                                          33

2.19  Purpose of Cost Accounting                                                           33

CHAPTER THREE: RESEARCH METHODOLOGY

3.0    Introduction                                                                                     35

3.1    Research Design                                                                             35

3.2    Population of the Study                                                                   35

3.3    Sample Size/Sampling Technique                                                 35

3.4    Method of data collection                                                               35

3.5    Questionnaire Service                                                                    36

3.6    Validity of Instrument                                                                      36

3.7    Method of Data Analysis                                                                36

CHAPTER FOUR: DATA PRESENTATION AND ANALYSIS

4.1    Introduction                                                                                     37

4.2    Data presentation and Analysis                                                      37

CHAPTER FIVE: SUMMARY, CONCLUSION AND RECOMMENDATION

5.1    Summary of Findings                                                                      49

5.2    Conclusion                                                                                       50

5.3    Recommendation                                                                            50

5.4    Suggestion for further study                                                           51

Reference                                                                                        52

Appendix I (Research Questionnaire)                                            53

 

CHAPTER ONE

INTRODUCTION

  • Background of the Study

The main concern of this work is the research on the impact of cost accounting in manufacturing organization. In the last ten years or more, the Nigeria economy has been going through a turbulent phase a development which has been going through greatly affected the manufacturing sector of the economy.

Ever since use of the money replaced “barter” people have been into one form of business of the other for direct exchange for money in the business world. This has made businesses out grown its boarder, businesses has grown from smaller unit into multinational because such businesses have applied simple cost accounting system and techniques.

Cost accounting help to allocate the expenditure of a business in such a way it is possible to ascertain the cost of each job, contract or process carried out per time. However, it is by no means its function amongst other benefit occurring from cost accounting, is that it helps to distinguished between unpredictable activities from the profitable ones. It indicated source of wastage or losses whether of time materials or in the usage of machinery equipment or tools decision making e.g. a function of management is a process that requires details, the past and present so that we can tackle future challenge so as to achieve organizational set goals.

Cost accounting is mainly concern with internal reporting to management so as to be able to plan control and make effective decision that will emanate to goals effectively and efficiently. It is therefore follow that the role of cost accounting in an organization such as hospitals, transportation companies, financial houses, manufacturing companies should no be over emphasized to goals effectively and efficiently. It is therefore follow that the role of cost accounting in an organization such as hospitals, transportation companies, financial houses, and manufacturing companies should not be over emphasized.

  • Statement of the Research Problem

From the foregoing it has been stated that, management has the responsibility of making decision in business entity and it should also be known that if a wrong decision is made, it will go a long way in affecting the output of such organization and when a right decision is made at the right time there will be positive result and organizational goals are achieved effectively and efficiently. It therefore means an efficient application of cost accounting techniques and method necessary for dry business concern. Despite this glaring and obvious facts, some entrepreneur/managers still complain of high cost of installation and maintenance of this vital system. Others too see this system as a mere duplication of financial accounting role.

It has observed that to a large extent that the major course of failure in business organization is due to the negatives of non application of these vital tools of costing techniques in its day to day operations.

The non application of costing techniques has led to the following problems.

  1. Poor/inaccurate accumulation of product cost in other words, the cost of product is not truly know.
  2. Poor/inadequate information that is needed to enable the company establish competitive selling price especially when in other words, the product cannot be ascertained.
  3. Poor/inadequate information that is needed for planning, control and decision making.
  4. Poor/inadequate information makes it difficult for proper control of activities thus leading to increase in waste, losses etc.

Thus, this study is embarked upon to critical evaluate and report as to whether or not efficient cost accounting system is in place.

  • Objectives of the Study

The study seek to achieve the under listed objectives.

  1. To investigate and report on whether cost accounting techniques is in operation.
  2. Investigation and report on the problem or constraints of establishing cost accounting system.
  3. Investigate and report reasons why most entrepreneurs do not apply cost accounting techniques.
  4. Investigate and report the impact of cost accounting techniques.
  5. Makes appropriate recommendations on the subject matter.
    • Research Question

In trying to find out more about the impact of accounting in manufacturing organization, the following research questions have been raised;

  1. What are the various problems of establishing cost accounting system?
  2. To what extent has proper cost accounting have effect on an organization?
  3. To what extent can it be that cost accounting system is in operation?
  4. To what extent does accurate cost accounting serve in the life of the manufacturing organization?
  5. To what extent can it be said that cost accounting generate adequate information for planning, control, and decision making in an organization?
  6. What are the various reasons why most managers/entrepreneurs do not want to establish cost accounting system in their organization?
  7. To what extent can it be said that management make use of this information generated from cost accounting in formulating its policies for the organization?
  8. What are the general recommendations?
    • Justification of the Study

This study is significant in what;

  1. The findings and recommendation are veritable tools for decision making for management.
  2. The study will be use for persons interested on the subject matter.
  3. The study will help to update the literature on the subject matter.
  4. This study can serve as a base for further studies on the subject matter.
  5. The study will help potential manufacturing organization to install or improve on their cost account system.
    • Scope of the Study

The scope of this study  is centred on the impact of cost accounting in manufacturing organization as it relates to Beta Glass Company Limited, Ughelli, however, findings can be use to generalize on the subject matter.

  • Limitation of the Study

The research encounters a lot of constraints both human and non – human.

The study was faced with financial problem as well as challenges of time. Also some information was treated as top secret. Be that as it may, the data available for the study will be sufficient to achieve the stated objectives.

 

 

  • Research Methodology

The study made of both primary and secondary data. Primary data were gotten from observation and questionnaires. Whereas, secondary data were gotten from journals, books, interview etc.

The statistical tools used to analyzed the data were collected was the chi – square method and simple percentage method.

  • Plan of the Study

The research work contains five chapters, chapter one covers the background of the study, statement of the research problems, objectives of the study, research questions, justification of the study, scope of the study, plan of the study and definitions of terms of the study.

Chapter two covers the literature review while chapter three deals with research methodology, chapter four focuses on the data presentation and analysis and chapter five covers the summary, findings, conclusion and recommendation of the study.

  • Definition of the terms
  1. Cost: This defined as that which is given or sacrifices to obtain something
  2. Cost accounting: It is that part of management accounting which established budget and standard cost and actual of operations, process, department or products and the analysis of variance, profitability of social uses of fund.
  3. Classification: This is the grouping of all item of expenditure, therefore can be classify under the following headings in common characteristics.
  4. Cost centre: It is a place or person and equipment around which cost are segregated e.g. secretaries.
  5. Idle time: Where workers are remunerated on the time basis the different between the home for which they have paid but from which he obtained no direct loan advantage.
  6. Cost code: The institute of cost management has series of alphabetical and or numerical symbols each which represent a descriptive title in cost classification.
  7. Cost audit: It is defined as the verification of the prescribed cost accounting procedure and the continue relevance of such opinions.
  8. Cost unit: A qualitative unit of product or services in relation to which cost is ascertained.
  9. Cost absorption: Absorption refers to the process of dividing cost in some equitable ways among the numbers of cost on cost centre.
  10. Cost allocation: This means tracing cost to cost and then making transfer to reflect wages of one cost centre by another.
  11. Fixed cost: A cost which occurred in relation to the passage of time, and within certain output of turnover.
  12. Variable cost: A cost which is aggregate tend to vary indirect proportion to changes in the volume of output or turnover. Examples are material, labour, power or steam etc.
  13. Contribution: This can be defined as the difference between sales value and marginal cost of sales.
  14. Ideal standard: This is based on perfect performance, it is assumed there is no wastage, no deficiency, no idle time, no breakdown, or either imperfection in the manufacturing process.
  15. Attainable standard: This is a sort of average achievement wastage avoid and reasonable allowance makes for breakdown and after amendable lapses for perfect efficiency.
  16. Capacity ratio: A measure of the use that is made of resource in the capacity ratio.

 

DOWNLOAD COMPLETE WORK

DISCLAIMER: All project works, files and documents posted on this website, eProjectTopics.com are the property/copyright of their respective owners. They are for research reference/guidance purposes only and some of the works may be crowd-sourced. Please don’t submit someone’s work as your own to avoid plagiarism and its consequences. Use it as a reference/citation/guidance purpose only and not copy the work word for word (verbatim). The paper should be used as a guide or framework for your own paper. The contents of this paper should be able to help you in generating new ideas and thoughts for your own study. eProjectTopics.com is a repository of research works where works are uploaded for research guidance. Our aim of providing this work is to help you eradicate the stress of going from one school library to another in search of research materials. This is a legal service because all tertiary institutions permit their students to read previous works, projects, books, articles, journals or papers while developing their own works. This is where the need for literature review comes in. “What a good artist understands is that nothing comes from nowhere. The paid subscription on eProjectTopics.com is a means by which the website is maintained to support Open Education. If you see your work posted here by any means, and you want it to be removed/credited, please contact us with the web address link to the work. We will reply to and honour every request. Please notice it may take up to 24 – 48 hours to process your request.

WeCreativez WhatsApp Support
Administrator (Online)
Hello and welcome. I am online and ready to help you via WhatsApp chat. Let me know if you need my assistance.